RF electronics: Difference between revisions
John Leach (talk | contribs) m (John Leach moved page Radio frequency electronics, nuclear magnetic resonance to RF electronics over a redirect without leaving a redirect: restored correct title) |
John Leach (talk | contribs) (c/e) |
||
| Line 1: | Line 1: | ||
{{subpages}} | {{subpages}} | ||
As in [[radar]], [[nuclear magnetic resonance]] has to manage strong transmitted and weak received signals. It does so by switching between transmit and receive modes. | As in [[radar]], [[nuclear magnetic resonance]] has to manage strong transmitted and weak received signals. It does so by switching between transmit and receive modes. | ||
==Transmitter subsystem== | ==Transmitter subsystem== | ||
It consists of the radio [[waveform synthesizer]] and [[power amplifier]]. | It consists of the radio [[waveform synthesizer]] and [[power amplifier]]. This subsystem is responsible for generating waveforms of the required frequency, amplitude, phase and duration at specified times. Multiple RF synthesizers are required because many MR experiments require simultaneous application of RF pulses of different frequency. Earlier MR systems used waveform generators with subsequent phase modulation. However, more recent systems rely on DDS (direct digital synthesis). | ||
==Switching subsystem== | ==Switching subsystem== | ||
RF switch is responsible for coupling either the Transmitter or the Receiver subsystem to the probe. | RF switch is responsible for coupling either the Transmitter or the Receiver subsystem to the probe. This ensures that the sensitive receiver subsystem is not overloaded with the high powered RF signal generated by the transmitter system. Also, the receiver is 'blanked' during the transmission and for a short duration afterward. | ||
==Receiver subsystem== | ==Receiver subsystem== | ||
This consists of the components: | This consists of the components: | ||
* | * Pre-amplifier | ||
*Amplifier | * Amplifier | ||
*Demodulator | * Demodulator — responsible for subtracting a reference frequency of specified phase from the observed signal | ||
*Analog-to-Digital converter (ADC) | * Analog-to-Digital converter (ADC) | ||
Magnetic field gradients are controlled by an independent subsystem. | |||
Magnetic field gradients are controlled by an independent subsystem. Magnetic field gradients are generated by passing current through coils of appropriate geometry. | |||
Revision as of 15:13, 3 April 2024
As in radar, nuclear magnetic resonance has to manage strong transmitted and weak received signals. It does so by switching between transmit and receive modes.
Transmitter subsystem
It consists of the radio waveform synthesizer and power amplifier. This subsystem is responsible for generating waveforms of the required frequency, amplitude, phase and duration at specified times. Multiple RF synthesizers are required because many MR experiments require simultaneous application of RF pulses of different frequency. Earlier MR systems used waveform generators with subsequent phase modulation. However, more recent systems rely on DDS (direct digital synthesis).
Switching subsystem
RF switch is responsible for coupling either the Transmitter or the Receiver subsystem to the probe. This ensures that the sensitive receiver subsystem is not overloaded with the high powered RF signal generated by the transmitter system. Also, the receiver is 'blanked' during the transmission and for a short duration afterward.
Receiver subsystem
This consists of the components:
- Pre-amplifier
- Amplifier
- Demodulator — responsible for subtracting a reference frequency of specified phase from the observed signal
- Analog-to-Digital converter (ADC)
Magnetic field gradients are controlled by an independent subsystem. Magnetic field gradients are generated by passing current through coils of appropriate geometry.