User:Ryan Cooley/DAB: Difference between revisions
imported>Ryan Cooley m (autosave) |
imported>Ryan Cooley (autosave) |
||
Line 29: | Line 29: | ||
<!-- Move this country-list mess to a subpage, then expand --> | <!-- Move this country-list mess to a subpage, then expand --> | ||
;DAB | ;DAB | ||
Canada | Canada (may go to HD Radio) | ||
UK | UK | ||
Line 153: | Line 153: | ||
The time and frequency interleaving procedure ensures that bits which are adjacent in time in the sub-channel bit stream are not adjacent in time and frequency when coded onto the 1536 carrier of digital radio signal. | The time and frequency interleaving procedure ensures that bits which are adjacent in time in the sub-channel bit stream are not adjacent in time and frequency when coded onto the 1536 carrier of digital radio signal. | ||
Viterbi or soft-decision maximum likelihood decoding | |||
By using FFT techniques it is possible to use signals with a special mathematical property: orthogonality. This allows us to pack the separate sub-carriers closely together. Even though their spectra are overlapping it is possible to retrieve the transmitted information without interference. (DAB The first UK field trial -- BBC 1991-02) | |||
Revision as of 10:59, 9 October 2008
Rough Draft. Probably take a month to look like anything.
Digital Audio Broadcasting (DAB, or EUREKA-147) is a standard for transmitting lossy encoded digital audio.
History
The EUREKA (European Research Coordination Action) project is a pan-European, intergovernmental initiative, for industrial (non-military) research and development. It does not have any association with the European Union (EU), even though the two share many common goals. [1] [2]
DAB has been in development since 1981, initially by Institut für Rundfunktechnik (IRT).
In 1987 the E!147 project started, taking 6 years to define the DAB standard, and several more to implement it. The DAB standard was publish February 1995, and experimental broadcasts began a few months later (such as the BBC in London). The project ended in 2000, costing a total of 89.2 million Euros. Germany and France contributing the majority, at 36% each. [3]
DAB, DAB+ and DMB are all part of the Eureka-147 family of standards. http://www.dab-digitalradio.ch/?lang=en&c=db_gl#DAB+
"The EBU and the Eureka 147 DAB (Digital Audio Broadcasting) project set up a joint group in 1992, in order to evaluate the performance of the Eureka 147 DAB system."
So the WorldDAB Forum decided in June 2005 to start the development of an alternative audio system for DAB the Technical Committee set up the Task Force, New Audio System. The result of 1.5 years of enthusiastic work the norm "Transport of Advanced Audio Coding (AAC) audio" was published by ETSI in February 2007 and was announced publicly as DAB+ at the same time.
DMB...
DAB+ was published in February 2007
Adoption
Adoption/Stats: http://www.ebu.ch/en/technical/trev/trev_311-dab_dmb.pdf
- DAB
Canada (may go to HD Radio) UK
- DAB+
Australia Malta Switzerland
- DMB
South Korea
RF
OFDM:
Multipath, Doppler Shift, Interference. Inter-Symbol Interference (ISI) Fast Fourier Transform (FFT) Differential QPSK 4 quad. phases (0°, 90°, 180°, 270°.) no channel equalization needed (up to) 1536 (narrowband) carriers Guard Interval 1/4th symbol length interval copies end of symbol before start of symbol Multipath Single-Frequency Networks (FSN) Synchronization Null symbol Phase Reference Symbol (PRS)
Frequency-Domain Multipath
(Punctured) Convolutional Coding (COFDM) Forward-error correction (FEC) Normally; half-rate. == 1.2Mb/s Viterbi decoder (put the digital signal in the correct chronological order and check the signal for transmission errors) Bit-stream re-ordering; Pre-determined patterns Temporal: Between Frames; depth 360ms Frequency: Interleaving.
The performance of this modulation scheme in
various channels is described in ETSI 101 758: Digital Audio Broadcasting (DAB); Signal strengths and receiver parameters; Targets for typical operation. For an MPEG-1 Layer II codec, the C/N for non-audio impairment is 14 dB for the majority of locations in urban and rural environments and at speeds below 130 km/h.[4]
-15 db average loss indoor reception
UEP 3 (~0.5)
4 transmission modes, 1,2,4,8KHz wide
Mode 1: Band III (4x1.54MHz DAB in 7MHz UKTV space) 70km max SFN antenna spacing Mode 2: L-Band (1452-1492MHz, world) est 17km max SFN antenna spacing Mode 3: up to 3GHz for satellite est 8km max SFN antenna spacing Mode 4: L-Band, sometimes appropriate (L-Band SFNs) est 35km max SFN antenna spacing
The gross data capacity for the entire DAB signal is approximately 3 Mbit/s, of which the Main Service Channel occupies approximately 2.3 Mbit/s. After allowing for the redundancy provided by the channel encoding, a net useful payload in the range of 0.6 - 1.7 Mbit/s is available. For the BBC's national multiplex, the useful payload of the MSC is approximately 1.2 Mbit/s. [6]
6 x 192Mb/s MP2 = 1.2Mb/s
Fast Information Channel (FIC) - Non-interleaved
Multiplex configuration information reference frequency and timing information overhead and control. Multiplex Configuration Information (MCI).
?Service Information (SI) Main Service Channel (MSC)
MP2 audio
Packet Demux for datacasts 24ms frames
Data Services
"ETSI specification, EN 300 401 (Second Edition) specifies the transmitted DAB signal."
'CD quality' using bit-rates of 192 kbit/s or above for stereo
Transmission mode I is intended for terrestrial Single Frequency Networks (SFN) and loca-area broadcasting in Bands I, II and III. Transmission mode II is intended to be used for terrestrial local-area broadcasting in Bands I, II, III, IV, V and in the 1,452-1,492 MHz frequency band (i.e. L-Band).
The DAB signal comprises a succession of transmission frames of 96 ms duration in mode I and of 24 ms duration in mode II. Within these transmission frames, the synchronization channel occupies approximately the first 2.544 ms in mode I, and approximately 0.636 ms in mode II.
(Mode I) ... permits the use of relatively widely-spaced transmitters, whereas in transmission mode II the However, mode II has fewer radiated carriers; also, for mobile reception in L-Band, the greater frequency seperation of the carriers is intended to reduce the effect of Doppler shifting for reception in moving vehicles, especially at the higher speeds. There are 1,536 radiated carriers in mode I, and 384 carriers in mode II, in a system bandwidth of about 1.54 MHz.[7]
Ensemble - A 1.536MHz block of carriers.
ETSI - European Telecom Standardization Institute.
Forward Error Correction Levels: Error Protection Level FEC Rate Capacity required for a 192 kbits/s MP2 channel 1 0.34 568 kbits/s 2 0.43 448 kbits/s 3 0.51 384 kbits/s 4 0.62 312 kbits/s 5 0.75 256 kbits/s [8]
Protection level one offers the best protection with a coding rate of approximately 1/3. Level five offers the least protection and has a coding rate of approximately 3/4.
Examples of SI are
- Service identifier.
- Programme type.
- Radio frequencies of associated FM, MF and digital radio services.
- Announcement switching (linked to announcement channels in an ensemble).
FIC 96 kbit/s (fixed 64 kbits/s ECC) MSC 2.304 Mbit/s
The time and frequency interleaving procedure ensures that bits which are adjacent in time in the sub-channel bit stream are not adjacent in time and frequency when coded onto the 1536 carrier of digital radio signal.
Viterbi or soft-decision maximum likelihood decoding
By using FFT techniques it is possible to use signals with a special mathematical property: orthogonality. This allows us to pack the separate sub-carriers closely together. Even though their spectra are overlapping it is possible to retrieve the transmitted information without interference. (DAB The first UK field trial -- BBC 1991-02)
Reception
DAB can be said to have a more gradual "digital cliff" effect than most digital broadcast standards. Where reception is weak, and numerous errors in the channel make perfect reception impossible, audible distortion can be heard, rather than the signal being completely lost. The artifacts are said to sound like "bubbling mud".
Some DAB broadcasters are using much lower power levels than analog FM counterparts, making digital reception relatively more difficult.[9]
DAB is broadcast at a substantially higher frequency than analog FM. Around 100 MHz for FM, versus 1,500 MHz for DAB. Propagation is considerably different at those significantly higher frequencies, so it's inherent than in some situations where analog radio was easily received, DAB cannot be. These higher frequencies are particularly disadvantageous when the signal must travel through objects (like buildings, or even tree leaves) to be received. So DAB is much more sensitive to having "line-of-sight" than is analog radio, through no inherent fault of its own.
Data Coding
MPEG-1 Layer II audio at 48kHz or 24kHz
A 192kbit/s DAB channel can cost from 2 to 20 million Euros, depending on how well utilized each transmitter is.[10]
insert PAD into the Musicam frames
Electronic Program Guide (EPG) Intellitext
UK
"The BBC covers 85% of the UK population" [11]
"In the United Kingdom, 12.5 MHz of Band III spectrum from 217.5 - 230 MHz has been allocated to DAB. This will accommodate seven multiplexes. The BBC has been allocated one of these channels for its national DAB multiplex" [6]
Commercial DAB licenses "starting in the Spring of 1998". BBC full SFN completion at the same time.[6]
"RDS travel bulletins to interrupt listening,"
World
"100 million people" circa 2007
DAB+
MPEG-4 HE-AAC v2
Reed-Solomon additional ECC 8.3% overhead Marginally better fringe reception due to R-S Muting instead of artifacts
Stream and Packet Mode. The ten parity bytes per 110 data bytes equivalent to an over-head of 8.3% lead to an ability of correcting up to five erroneous bytes in those 120 bytes (Fig. 9).
DAB+ was published in February 2007 as ETSI TS 102563 "Digital Audio Broadcasting (DAB); Transport of Advanced Audio Coding (AAC) audio".
HE-AAC v2 provides the same perceived audio quality at about one third of the sub-channel bitrate needed by MPEG Audio Layer II. DAB+ Bullshit[12]
Moser AAC+ Bullshit. Does not mention MP2 at all[13] Ridiculously low AAC bitrates are cited are based on ITU-R BS. 1534 MUSHRA (MUltiple Stimulus test with Hidden Reference and Anchor) testing, versus ITU-R BS.1116-1 testing for older, higher MP2 bitrates.[14]
For traditional DAB, SBR can be combined with MP2 to provide better audio quality at a given bitrate (to newer receivers equipped with SBR decoding), while legacy decoders would still be able to listen to a lower quality audio signal.[15] This would eliminate the need for the 8% overhead of reed-solomon codes, and maintain backwards compatibility with DAB receivers already sold. Tests by IRT have shown that DAB reception is not affected by SBR. [16]
DAB will actually outperform DAB+ in some cases... MPEG-1 Layer II performs just as well as AAC in high quality/high bitrate audio encoding (See: MPEG-1#Quality) yet doesn't require the additional 8.3% overhead of Reed-Solomon error-correcting codes DAB+ added to make AAC usable. DAB+ also has much higher computational requirements.
In areas like the UK, where DAB sound quality is being sacrificed by broadcasters to cut costs and include more channels, it's likely DAB+ would be beneficial. In areas where channel demand is not as high, and channel bitrates of 192kbit/s are practical, DAB+ doesn't offer any advantages.
CTAAC+ http://www.ebu.ch/trev_291-dietz.pdf
DRM http://www.ebu.ch/trev_286-stott.pdf
See Also
References
- ↑ http://www.eureka.be/about.do
- ↑ http://www.eureka.be/about/history.do
- ↑ http://www.eureka.be/inaction/AcShowProject.do?id=147
- ↑ http://www.ebu.ch/trev_299-mason.pdf
- ↑ http://www.ntl.com/locales/gb/en/guides/anoraks/glossary.asp
- ↑ 6.0 6.1 6.2 http://www.bbc.co.uk/rd/pubs/papers/paper_21/paper_21.shtml
- ↑ http://www.bbc.co.uk/rd/pubs/reports/1994-18.pdf
- ↑ http://www.ntl.com/locales/gb/en/guides/anoraks/whyneed.asp
- ↑ http://www.dab-digitalradio.ch/?lang=en&c=stoer
- ↑ http://www.ebu.ch/en/technical/trev/trev_305-skiold.pdf
- ↑ http://www.bbc.co.uk/radio/waystolisten/digitalradio/
- ↑ http://www.worlddab.org/public_documents/dab_plus_brochure_200803.pdf
- ↑ http://www.ebu.ch/en/technical/trev/trev_305-moser.pdf
- ↑ http://www.irt.de/en/activities/production/audiovideo-quality.html
- ↑ http://www.nab.org/AM/PrinterTemplate.cfm?Section=Small_Market_Television_Exchange1&CONTENTID=9329&TEMPLATE=/CM/ContentDisplay.cfm
- ↑ http://www.irt.de/en/activities/production/audio-and-video-encoding.html