Oxygen: Difference between revisions
imported>Paul Wormer |
imported>Paul Wormer |
||
Line 36: | Line 36: | ||
Crystalline oxygen has three phases: α (monoclinic), β (rhombohedral), and γ (cubic). | Crystalline oxygen has three phases: α (monoclinic), β (rhombohedral), and γ (cubic). | ||
Phase transitions are γ → β: 43. | Phase transitions (at p = 0) are γ → β: 43.801 K, α → β: 23.880 K.<ref>Yu.A. Freiman and H.J. Jodl, ''Solid oxygen'', Physics Reports, vol. '''401''', pp. 1-228 (2004).</ref> | ||
==Biological role== | ==Biological role== | ||
Almost all organisms need oxygen for their cellular [[metabolism]] from which they obtain their energy. By [[respiration]] the required oxygen is imported from the air and some waste products, such as carbondioxide, are exported. For mammals red blood cells containing [[hemoglobine]] are an important mediator in the transport of oxygen to the tissues. A human can survive for only a few minutes without oxygen, irreversible brain damage occurs if there is lack of oxygen for a longer period. | Almost all organisms need oxygen for their cellular [[metabolism]] from which they obtain their energy. By [[respiration]] the required oxygen is imported from the air and some waste products, such as carbondioxide, are exported. For mammals red blood cells containing [[hemoglobine]] are an important mediator in the transport of oxygen to the tissues. A human can survive for only a few minutes without oxygen, irreversible brain damage occurs if there is lack of oxygen for a longer period. |
Revision as of 08:09, 15 September 2007
Oxygen (chemical symbol O) is the most abundant (46.6%) chemical element of the lithosphere (the external layer of earth, which constitutes plates). It is a constituent of water (H2O), of rocks and sand in the form of silicium oxide (SiO2) and part of the atmosphere (21%) in the form of the oxygen molecule (O2). The O-atom has nuclear charge 8 e, where e is the elementary charge, and 8 electrons, which means that it occupies the eighth position in the Periodic system of elements. Atomic oxygen is very reactive, so that the element does not occur naturally in free form, but only in compounds.
History
Today we know that the burning of wood and other fuels is a process of oxidation. It is a chemical reaction of fuel with oxygen from the ambient air, yielding mainly heat, carbondioxide (CO2), and water (H2O). Although this chemical reaction is the most important discovery in the history of mankind, for many centuries the combustion process was not at all understood. The first step in understanding came in the early 18th century when Georg Ernest Stahl conjectured that in the combustion process a substance called phlogiston escapes from the flames. This idea was adopted by many chemists, among whom the independent discoverers of oxygen Carl Wilhelm Scheele (in 1771) and Joseph Priestley (in 1774). They discovered what they called dephlogisticated air. Soon after (1777) Antoine Laurent Lavoisier communicated to the French Academy that dephlogisticated air is a constituent of several acids and hence must be a chemical element. Because Lavoisier believed (erroneously) that the presence of oxygen in an acid was essential, he proposed to replace the name dephlogisticated air by oxygen meaning generator of acidity. (The old-Greek word for wine vinegar being oxys—όξύς, from the Greek word for sharp, also όξύς). Lavoisier understood that oxygen was an important part of air, and this fact was proved beyond doubt when oxygen was separated from liquid air by distillation (1883).
Chemical properties
The oxygen atom in its quantum mechanical ground state has the electron configuration 1s22s22p4. The ground state atom is in a 3P state, i.e., it is an electron-spin triplet (S = 1) and has orbital angular momentum quantum number L = 1. The O2 molecule in its ground state has the electron configuration 1σ2g 1σ2u 2σ2g 2σ2u 1π4u 3σ2g 1π2g. The highest occupied molecular orbitals, 1πg,x and 1πg,y, are directed perpendicular to the bond; they are are singly occupied. The electrons occupying these two orbitals couple to a triplet spin. Hence the O2 molecule is a spin triplet in its ground state and is therefore paramagnetic. The binding energy of the molecule is 117.93 kcal/mol = 493.42 kJ/mol with a vibrationally averaged bondlength r0 of 0.1207 nm.
The oxygen atom in compounds is very electronegative, second only to fluorine. Oxygen is a strong oxidizer, so that many elements appear as an oxide. The best-known oxides are: dihydrogen oxide (water), carbon dioxide ("carbonic acid"), nitrogen oxide and nitrogen dioxide, nitrate (NO3 in nitric acid and its salts), sulphur dioxide, sulphate (SO4 in sulphuric acid and its salts), and ferric oxide Fe2O3 (well-known in the form of rust, which is ferric oxide plus crystal water).
About 94.2 kJ/mol above the triplet ground state of O2 there is a singlet state. In the isolated molecule, the transition from triplet to singlet is strictly forbidden. As a consequence, singlet oxygen in the gas phase is extremely long lived (72 minutes). Interaction with solvents, however, reduces the lifetime to microsecond or even nanoseconds. The chemistry of singlet oxygen is quite different from that of triplet oxygen.
The molecule O3 (ozone) is relatively stable. At normal temperature and pressure it decomposes slowly according to: 2O3 → 3O2 + 69 kcal/mol. In the outer atmosphere (stratosphere) ozone is formed under influence of ultraviolet (UV) light.
Molecular oxygen can be prepared by the heating of several oxides, for instance the heating of mercury oxide gives: 2HgO → 2Hg + O2. This was the reaction used by Scheele and Priestley (see the history section). A well-known, but expensive, manufacturing process is the electrolysis of water that gives pure H2 and O2. The most efficient process is the fractional distillation of liquefied air by the Linde process, invented by Carl von Linde in 1895. This is the process that is widely used in the industrial manufacturing of oxygen.
Industrial applications
Most industrial oxygen is used in the basic oxygen steelmaking process. In this method pure oxygen is blown into a bath of molten blast-furnace iron and scrap. The oxygen initiates the oxidation of such impurities as carbon, silicon, phosphorus, and manganese, yielding relatively pure steel.
Another application is in oxyfuel welding, where pure oxygen is used to burn a fuel, so that temperatures are obtained that are high enough for welding.
Liquid oxygen is used as an oxidator in rocket fuels.
Physical properties
At normal temperature (0 0C) and pressure (1 atm = 101.325 KPa) the oxygen molecule is a tasteless, colorless, and odorless gas of density 1.429 kg/m³. Its boiling point and freezing point at normal pressure are 90.188 K, and 54.361 K, respectively. The density of liquid O2 at boiling point and normal pressure is 1142 kg/m³. Critical quantities are: Tc = 154.581 K, pc = 5.0430 MPa, and critical density (Dc): 13630 mol/m³ = 436.2 kg/m³.
Crystalline oxygen has three phases: α (monoclinic), β (rhombohedral), and γ (cubic). Phase transitions (at p = 0) are γ → β: 43.801 K, α → β: 23.880 K.[1]
Biological role
Almost all organisms need oxygen for their cellular metabolism from which they obtain their energy. By respiration the required oxygen is imported from the air and some waste products, such as carbondioxide, are exported. For mammals red blood cells containing hemoglobine are an important mediator in the transport of oxygen to the tissues. A human can survive for only a few minutes without oxygen, irreversible brain damage occurs if there is lack of oxygen for a longer period.
Large quantities of oxygen are removed daily from the atmosphere by combustion of fossile fuels by industry, traffic and house heating. Also the respiration of aerobic organisms consumes oxygen. The only source of replenishing is the process of photosynthesis, which occurs in green plants. In fact, it is generally assumed that this process is responsible for the existence of gaseous oxygen in the earth's atmosphere and that higher forms of life only became feasible after sufficient oxygen had been supplied by photosynthesis.
Isotopes
The standard atomic mass—the average over different isotopes weighted by abundance—of oxygen is 15.9994 u. (The unit u is the unified atomic mass unit). The following are the atomic masses of the stable isotopes with their abundance in brackets:
- 16O 15.994 914 6221 (99.757%)
- 17O 16.999 131 50 (0.038%)
- 18O 17.999 160 4 (0.205%)
Besides these stable isotopes, a number of short-lived (i.e., radioactive) artificial isotopes of oxygen are known.
Reference
Yu.A. Freiman and H.J. Jodl, Solid oxygen, Physics Reports, vol. 401, pp. 1-228 (2004).
- ↑ Yu.A. Freiman and H.J. Jodl, Solid oxygen, Physics Reports, vol. 401, pp. 1-228 (2004).