User:John R. Brews/CZ psychology authors
A junction field-effect transistor or JFET is a three-terminal device that conducts current, made of two semiconductor layers. For a discussion of dopant impurities and the terminology p- and n-type. see dopant impurities.
Operation
The figure shows a JFET with an n-type body and a p-type gate region. The dark-colored portion of the body is conducting, due to the electrons in this region, and is called the channel. The light-colored portion of the body is depleted of electrons and is not electrically conducting.
The n-type body in the figure conducts electricity when a voltage drop is applied between source and drain. The amount of current depends, among other things, upon the cross-section of the device that is conducting. This cross section is controlled by the gate, which makes ohmic contact to a p-type region. If the gate-source pn-junction is reverse biased by applying a negative voltage to the gate and holding the source at ground, the depletion region within the pn-junction widens, restricting the cross section of the conducting channel.
The insulating portion of the body varies in width from source to drain because the current through the body causes a voltage drop as suggested by Ohm's law that varies with distance and increases the amount of reverse bias between the gate and body as a function of distance down the channel.