CZ:Using the subpages template

The current active template is now {{subpages}}.

Why use the Subpages template?

At first glance the subpages template adds the navigation tabs at the top of the page, and while this is useful, the real power of the template is not as obvious. The short version is that when this template is used on every page in an article cluster it saves time and makes the categorisation and look of the pages consistent.

Adds subpage navigation box

Requires that each subpage is a recognised name; see the current list of available subpage types at Template:Subpage list 2

The template adds a subpage navigation box at the top of each page in the article cluster. It can automatically identify each subpage in an article cluster and automatically adds a tab to the navigation box for each one present.

Automatic placement of categories

Requires that each cluster has a metadata template; see an example at Template:Biology/Metadata

Using the information about each article, that is stored on a specific metadata template, the subpages template manages the placement of categories and approval templates in a cluster. For example, if one new workgroup is added, or one removed, from the metadata template this has an immediate global effect on the categories in the whole cluster. This saves a lot of time since the manual placement or removal of categories is no longer required. This has the added advantage that all the pages in a cluster are consistent at all times.

Automatic placement of headers

Headers for each subpage are added automatically and in the future this one template will allow us to modify the design or wording of ALL the articles in the citizendium with a minimal number of edits. The checklist table also "magically" appears on the talk page of the article after the checklist fields are completed on the metadata template.

Automatic placement of approval templates

Requires that each cluster has an approval subpage; see an example at Biology/Approval

Constables and editors who manage the approval process will only have to edit the metadata template. The addition of an editors name in the ToApprove section of the metadata template will cause the nomination template to be used on all relevant subpages in a cluster, generating an nomination notice, and adding the article to the ToApprove category. The goal is to simplify the approach to managing the approval process. With similar ease, by updating the metadata template after approval, the {{Approved3}} template is placed at head of the approved article. Constables or editors can easily document the whole process by correctly adding the {{Approval}} template on the article's /Approval page.

A consistent look

A final aesthetic touch is that the subpages template controls the background colours for the navigation tabs of approved (green) and unapproved (blue) articles. This has the advantage that the approved articles are move obvious when browsing between the different subpages. The consistent placement of all the navigation tools, notices and categories will make browsing CZ articles much more predicatable for a new reader.

Instructions for placing the Subpages template

First time

1) Type {{subpages}} at the top of the article page and save. Don't worry that the page looks messy.

2) Below the messy green template is a prompt to create a metadata template. Replace the ARTICLE_NAME with the name of your article and click the button just below it. A new page will open and you will see an edit box containing the following fields:

{{#switch: {{{info}}}
<!--Pagename must be filled out for template to work correctly-->
|       pagename =
|        variant =
<!--required for checklist -->
|            abc = 
|      cat_check = 
|         status = 
|    underlinked = 
|        cleanup = 
|             by = 
|           cat1 = 
|           cat2 = 
|           cat3 = 
<!--required for ToApprove template-->
|    article url =
|    subpage url = 
|        cluster =
|            now =
|     ToA editor = 
|    ToA editor2 =
|    ToA editor3 =
|           date =
<!--required for Approved template-->
|       A editor = 
|      A editor2 = 
|      A editor3 =
}}<noinclude>{{subpages}}</noinclude>

3) Fill out the "pagename" (the exact title of the article) and "abc" (same as the pagename, but if a biography: last name, first) and preferably "cat1" too (see our workgroup list). If you want to complete the whole checklist section, which would be nice, see The Article Checklist or read the see descriptions below for all the fields in the metadata template. Don't fill out the "required for ToApprove template" and "required for Approved template" sections.

4) Your article may have already been started and had a TALK page;

a) If this article did not have a TALK page, return to the main article, you will be prompted to create the two utility pages that are common to all articles; the Talk page and the Approval page.

b) If it did have a TALK page already and it has a {{checklist}}, go to the talk page and change the word 'checklist' in the {{checklist}} template to 'subpages'. Select and CUT the sections of the old template from |abc to |date. Click to save. You will then be prompted to 'Create the Approved' page from there. Just click on the blue link and save. Return to the metadata page and Select in the 'checklist' section from |abc to |date and then paste the contents that you cut from the talk page into the metadata page.

5) Once the metadata page and both utility pages are created the article cluster is complete. You are finished!

Adding optional subpages to articles already using subpages

1. Go to the talk page of the article.
2. Click on the show link next to the label "Unused pages" at the top of the talk page. A list of subpages for the article that have not yet been created, will appear.
3. Click on the name of the subpage you wish to create. If your intended subpage is not included in the list, then you can request that it be added as explained on CZ:Subpages.
4. Place {{subpages}} at the top of the new page and click save.

Parameters

General parameters

pagename = The exact pagename is used. It is required for navigation back to the home page on subpages.

variant = will be used to designate the spelling and grammar, primarily whether the article is written in AE - American, AuE - Australian, BE - British or CE - Canadian English.

Checklist parameters

abc = used to categorise based on last names. For example, the Barbara McClintock approval template is written as abc = McClintock, Barbara so she is categorised under M, or List of Biologists would be abc = Biologists, List of so it is categorised under B.

cat_check = put "yes" if you want someone to check over the categories

status = 0 for approved articles; 1 developed, 2 developing, 3 stub, 4 external

underlinked = put "yes" if not enough other articles link to it (click "What links here" at left)

cleanup = put "yes" if basic cleanup has been done.

by = Names of anyone editing the checklist, in reverse chronological order.

cat1 = must be an existing workgroup

cat2 = second workgroup (optional but must use before group3 if only two workgroups)

cat3 = third workgroup (optional)

ToApprove parameters

Type of approval:

Whole cluster use the article url and the cluster field.

Article only use the article url and leave the cluster field blank.

Subpage only us the subpage url field and leave the cluster field blank.

Article and ONE subpage use both the article and subpage url fields but leave the cluster field blank.

article url = the location in the page history where the version-to-approve lives.

subpage url = the location in the page history where the version-to-approve lives.

cluster = add text here if the whole cluster needs to be approved, otherwise leave blank.

now = the date and time when the template is added. Use ~~~~~ (five tildes) to let the computer generate it automatically.

ToA editor = the username of the person who did the approval (or who nominated the article on behalf of a group of people)

ToA editor2 = second editor (optional field but must use before editor3 if only two editors approved)

ToA editor3 = third editor (optional field)

date = format yyyymmdd (typically three days after "now", to allow copyedits and suggestions)

Approved template

A editor = the username of the person who initiated the approval (or who nominated the article on behalf of a group of people)

A editor2 = second editor (optional field but must use before editor3 if only two editors approved)

A editor3 = third editor (optional field)

Moving an article with subpages

In the event that it is necessary to move or rename an article, it is easiest to move all the related pages before moving the article itself.

At the moment, the easiest way to find out which subpages the page has (out of the large set of possible ones) is to use the "What links here" function. (To to this, in the normal skin, go the article, and click on "What links here" at the very bottom of the left-hand column.)

Note: This method doesn't work if any of the subpages do not have the proper {{Subpages}} header. If, so you will have to use a special built-in MediaWiki function. Open Special:Prefixindex/PAGE_NAME special form in a separate window/tab (so you can continue to read these instructions in this one :-), go into the 'Address' window of your browser in that new window/tab, and replace PAGE_NAME with the name of the page you're trying to move. This will definitely show all the subpages. (You can also do this once you think you're done moving all the subpages, below; it will show if you missed any.)

In any event, once you have a page listing all the subpages, click on each one in turn, and move it to the new name, using the "Move" function (at the top of the page). (Important: do not ever move a page by cutting and pasting (or copying and pasting) the contents, as this will divorce the content from its edit history. If a move fails, ask a more experience user, or a constable, for help solving your problem.) Note: If any of the subpages have associated Talk: pages, make sure to check the box on the move confirmation page to move them too.

Once you have moved all the 'normal' subpages (kept in the main article namespace), it's time to move the article's Metadata page (which is kept in the Template: name space). Go to the article's Talk: page, and click on the yellow "M" button. This will (should?) take you to the Metadata page: use the move function (as in the paragraph above) to move that to the new name. VERY IMPORTANT: change the pagename field on the metadata page to the articles new name.

Once you have moved all the other pages, including the subpages and the Metadata page, then it's time to move the Article and its Talk page.

|width=10% align=center style="background:#F5F5F5"|  |}